Image by pisauikan

Exclusive Services

ELECTRICAL SERVICES OUR TRAINED ELECTRICAL TECHNICIANS PROVIDE

Our Licensed and trained electricians can provide the following services at residential, commercial and industrial properties:

  • Electrical set up and rewiring

  • Electrical panel installation, upgrading and replacement

  • Whole house surge protection

  • Outlet installation and repair

  • Ceiling fan installation & repair

  • All lighting requirements – fixture installation, replacement and repair

  • Smoke and Co2 detector installations

  • Exhaust fan installations

  • Pool and hot tub wiring

  • Electrical safety inspections

  • All electrical maintenance and repair and more...

SEVEN COMMON ELECTRICAL REPAIRS & SERVICES

Light Dims, Buzzes or Flickers

Dimming, buzzing, or flickering lights are a very common problem. The main reason that lights buzz, flicker, or dim are:

  • The wiring is outdated and needs upgrading.

  • There are too many appliances running off the circuit or there is a fault in the circuit.

  • The switch is faulty and needs replacing.

  • The bulb is loose and needs to be tightened.

2

Light Switch is buzzing or not working

The main reasons that a light switch would be giving problems are:

  • It has not been connected correctly.

  • There is a problem with the wiring.

  • The switch is broken.

3

The Circuit breaker keeps tripping

Our Electricians often have to respond to calls of power tripping. There are a few reasons that this could be happening:

  • There may be a problem with a specific appliance that causes the circuit to trip when it is plugged in.

  • There may be an arc fault – a loose screw in the terminal connection in the switch or outlet.

  • The appliances used are drawing too much current and the wiring needs to be upgraded.

  • There is a short circuit – a hot wire is touching a neutral wire.

  • The circuit breaker is old or worn and needs replacing.

4

The Outlets are dead

Whether it is only one, or all the outlets that are dead, an electrician needs to be called to investigate the cause. Some causes of dead outlets are:

  • One or numerous fuses have tripped.

  • There is a fault in the electrical wiring.

  • The outlet is faulty.

5

The Plug is hot or buzzes or causes a shock or tingling sensation when you touch it.

You should not use the appliance or outlet if the plug feels hot, is blackened, or causes a shock or tingling feeling when touched. On investigation the electrician may find:

  • The outlet is faulty and needs to be replaced.

  • The wiring is faulty.

  • The appliance is faulty.

6

The Electric bill is very high

An abnormally high electric bill should be investigated and could be a result of:

  • A fault in the electrical wiring or circuit.

  • A leakage in the electrical system.

  • Outdated appliances that are drawing too much current.

7

Electrical Upgrading

When the wiring is old or the client is doing renovations to his property, an electrician will be required to:

  • Replace an old, too small, or outdated panel.

  • Install more lights, ceiling fans, light switches, and/or outlets.

  • Replace or upgrade the existing wiring.

Image by Markus Spiske

Let's Work Together

CG ELECTRICAL CONTRACTORS CORP – THE ELECTRICIANS OF CHOICE IN FLORIDA

If you are looking for an experienced, licensed, and insured electrician for any electrical service in Florida, CG Electrical Contractors Corp is just a call away. Call us at 321-295-1255 Monday to Saturday from 8 am to 5 pm and on Sunday for emergencies only.